Back
Wolverine Inferno 2 / Reaper 2 + MAXX MODEL · Alignment Kit V2.1 · SCAR-L HPA
Wolverine Inferno 2 / Reaper 2 + MAXX MODEL · Alignment Kit V2.1 · SCAR-L HPA
Wolverine Inferno 2 / Reaper 2 + MAXX MODEL · Alignment Kit V2.1 · SCAR-L HPA
Wolverine Inferno 2 / Reaper 2 + MAXX MODEL · Alignment Kit V2.1 · SCAR-L HPA
Wolverine Inferno 2 / Reaper 2 + MAXX MODEL · Alignment Kit V2.1 · SCAR-L HPA

Wolverine Inferno 2 / Reaper 2 + MAXX MODEL alignment kit for SCAR-L (v2.1)

24,00 €
1
Share on social media:

Version 2.1 of the hop-up alignment system, designed specifically for SCAR-L HPA replicas using:

  • Wolverine Inferno 2 or Reaper 2 engines (compact HPA engines with high pneumatic efficiency).
  • MAXX MODEL chamber (high-precision hop-up chamber optimized for HPA with excellent bucking control).

This system ensures solid alignment between the Wolverine engine nozzle and the MAXX MODEL chamber, improving feeding consistency and maximizing pressure efficiency in high-performance SCAR-L builds. Compatible with ICS lowers and split gearbox platforms.

Compatibility

Component Compatibility
HPA Engine Wolverine Inferno 2 / Reaper 2
Hop-up Chamber MAXX MODEL
Base Replica SCAR-L
Gearbox V2 / ICS SPLIT

What the kit includes

  • Rear clip for mounting using the rear body pin or fixed stock.
  • Base with housing for M3 threaded inserts (optional brass inserts).
  • Side clip for routing the HPA tube/line.
  • Front locking top cap specifically designed for the MAXX MODEL chamber.
  • Rear plate with mounting point for an M5 screw (additional reinforcement).

Installation and adjustment

1. Printing and preparation

  • Print the parts with 65–80% infill.
  • Lightly sand internal areas and contact surfaces for a clean fit.
  • Apply dry lubricant or wax on sliding areas to facilitate maintenance.

2. Installation in the replica

  • Insert the base into the ICS lower receiver and install the M3 threaded inserts.
  • Mount the rear clip aligned with the SCAR-L rear body pin.
  • Install the MAXX MODEL chamber with the inner barrel; the top cap locks the assembly and keeps everything centered.
  • Route the Wolverine Inferno 2 / Reaper 2 HPA line through the side clip.

3. Final fixation

  • Secure the rear plate using an M5 screw with washer for maximum rigidity.
  • Verify that the Wolverine nozzle enters the MAXX MODEL chamber perfectly centered.
  • Perform dry feeding tests and adjust engine pressure (50–120 PSI recommended for SCAR-L builds).

Required components (not included)

  • 4× M3 × 4.2 mm threaded inserts
  • 4× M3 × 8 SHCS screws

Lower receiver recommendations

Compatible with the ICS metal lower receiver (recommended for maximum rigidity in SCAR-L builds).

If you prefer a printed lower, the following Gearbox V2 Lower “Universal Lower Part” models are also compatible:

  • Version 3
  • Version 4.2
  • Version 4.3 MTW

Available here:
https://lab.sychev.xyz/categoria/hpa-lower

3D printing parameters

  • Approximate print time: ~1 h 30 min
  • Recommended material: PLA+
  • Layer height: 0.10 mm – 0.15 mm

Manuals

Installation and adjustment manuals are available in the Manuals section of the website or on the project’s Discord server.

Related products and articles

Similar product designs:

Technical articles for this topic:

Frequently asked questions

What material and dimensions apply to Wolverine Inferno 2 / Reaper 2 + MAXX MODEL alignment kit for SCAR-L (v2.1)?

The public product data does not declare a material or finished dimensions for this design. Check the images, downloadable files, and the exact manufacturing or printing setup before producing it.

What is Wolverine Inferno 2 / Reaper 2 + MAXX MODEL alignment kit for SCAR-L (v2.1) compatible with?

The published tags and categories identify this design with scar-l, wolverine inferno2, wolverine reaper2, maxx model, hpa, airsoft. Confirm the exact platform, revision, and mounting points before ordering.

How do I install or prepare Wolverine Inferno 2 / Reaper 2 + MAXX MODEL alignment kit for SCAR-L (v2.1)?

Read the installation notes in the product description, inspect the supplied files and images, and test alignment before final fastening. The required tools, fasteners, printing parameters, or post-processing depend on the specific build.

What are the real-world uses for Wolverine Inferno 2 / Reaper 2 + MAXX MODEL alignment kit for SCAR-L (v2.1)?

This design is intended for projects related to scar-l, wolverine inferno2, wolverine reaper2, maxx model, hpa, airsoft. It is useful for a compatible repair, conversion, prototype, replacement, or custom build when the published fitment and project requirements match.