Back
Sin título
Sin título

Blackdraft Phoenix + GATE EON alignment kit for ICS MPX (v2.1)

23,00 €
1
Share on social media:

Version 2.1 of the hop-up alignment system, designed specifically for ICS MPX/CXP HPA replicas using:

  • Blackdraft Phoenix engine (compact high-performance HPA engine with simple configuration).
  • GATE EON chamber (hop-up chamber designed for HPA platforms with precise adjustment and excellent feeding control).

BlackDraft Phoenix: This version is a pre-2026 beta release that is not compatible with 2026. If you need it, you can request it.

This kit guarantees perfect alignment between the Phoenix nozzle and the GATE EON chamber, eliminating offset issues that can affect consistency in compact platforms such as ICS MPX/CXP. Fully compatible with the original ICS lower receiver.

This template was created for Phoenix Beta, which was released before 2026, so if you need the 2026 version, just let me know and I'll put it together for you.

Compatibility

Component Compatibility
HPA Engine Blackdraft Phoenix
Hop-up Chamber GATE EON
Base Replica ICS MPX / CXP
Gearbox ICS split (compatible with ICS lower)

What the kit includes

  • Rear clip for mounting using the rear body pin or fixed stock.
  • Base with housing for M3 threaded inserts (optional brass inserts).
  • Side clip for routing the HPA tube/line.
  • Front locking top cap specifically designed for the GATE EON chamber.
  • Rear plate with mounting point for an M5 screw (additional structural reinforcement).

Installation and adjustment

1. Printing and preparation

  • Print the parts with 65–80% infill.
  • Lightly sand internal and contact surfaces for a clean fit.
  • Apply dry lubricant or wax on sliding surfaces.

2. Installation in the replica

  • Insert the base into the original ICS lower receiver (compatible without modifications).
  • Mount the rear clip aligned with the ICS rear body pin.
  • Install the GATE EON chamber with the inner barrel; the top cap locks the assembly while keeping everything centered.
  • Route the Blackdraft Phoenix HPA line through the side clip, optimized for the compact MPX/CXP layout.

3. Final fixation

  • Secure the rear plate using an M5 screw with washer for maximum rigidity.
  • Verify that the Phoenix nozzle enters the EON chamber perfectly centered.
  • Perform dry feeding tests and adjust the EON electronics if necessary.

Required components (not included)

  • 4× M3 × 4.2 mm threaded inserts
  • 4× M3 × 8 SHCS screws

Lower receiver recommendations

This kit is 100% compatible with the original ICS MPX/CXP lower receiver, requiring no modifications.

If you need printable alternatives for other builds, the following Gearbox V2 Lower “Universal Lower Part” models are also compatible:

  • Version 3
  • Version 4.2
  • Version 4.3 MTW

Available here:
https://lab.sychev.xyz/categoria/hpa-lower

3D printing parameters

  • Approximate print time: ~1 h 30 min
  • Recommended material: PLA+
  • Layer height: 0.10 mm – 0.15 mm

Manuals

Installation and adjustment manuals are available in the Manuals section of the website or on the project’s Discord server.

Related products and articles

Similar product designs:

Technical articles for this topic:

Frequently asked questions

What material and dimensions apply to Blackdraft Phoenix + GATE EON alignment kit for ICS MPX (v2.1)?

The public product data does not declare a material or finished dimensions for this design. Check the images, downloadable files, and the exact manufacturing or printing setup before producing it.

What is Blackdraft Phoenix + GATE EON alignment kit for ICS MPX (v2.1) compatible with?

The published tags and categories identify this design with ics mpx, ics cxp, blackdraft phoenix, gate eon, hpa, airsoft. Confirm the exact platform, revision, and mounting points before ordering.

How do I install or prepare Blackdraft Phoenix + GATE EON alignment kit for ICS MPX (v2.1)?

Read the installation notes in the product description, inspect the supplied files and images, and test alignment before final fastening. The required tools, fasteners, printing parameters, or post-processing depend on the specific build.

What are the real-world uses for Blackdraft Phoenix + GATE EON alignment kit for ICS MPX (v2.1)?

This design is intended for projects related to ics mpx, ics cxp, blackdraft phoenix, gate eon, hpa, airsoft. It is useful for a compatible repair, conversion, prototype, replacement, or custom build when the published fitment and project requirements match.